Reset refers to the act of returning a device, system, or program to its original or default settings. This can be done through various means, such as pressing a button or using a software command. The purpose of resetting is typically to fix problems or errors that have occurred, or to restore the device or program to its original state.
Follow the given steps to Reset Wavlink Extender
- Locate the Reset button on the back of the Wavlink extender. It is usually a small button with the word “Reset” or an icon of two arrows in a circle.
- Press and hold the Reset button for 15-20 seconds.
- Release the button and wait for the extender to reboot. This may take a few minutes.
- Once the extender has rebooted, it will be reset to its factory settings. You will need to set it up again by following the instructions in the user manual or on the Wavlink website.
- Reconfigure the settings of the extender by connecting to the default Wavlink network and following the instructions on the setup page.
- Once the setup is complete, test the extender’s connectivity by connecting to the extended network and checking for internet access.
- If the extender is still not working properly, you may need to contact Wavlink’s customer support for further assistance.
If you are still having issues with Reset Wavlink Extender. Please contact our experts to guide you in the right direction and assist you with your Resetting.
Why do we need to Reset Wavlink Extender?
There are several reasons why you may need to reset Wavlink extender:
- Troubleshooting connectivity issues: If you are experiencing connectivity issues with your Wavlink extender, resetting it may help to resolve the problem.
- Changing network settings: If you need to change the network settings on your Wavlink extender, such as the network name or password, resetting it may be necessary.
- Updating firmware: If a firmware update is available for your Wavlink extender, resetting it may be required in order to complete the update.
- Fixing errors: If your Wavlink extender is experiencing errors or malfunctioning, resetting it may help to fix the problem.
- Protecting data: If you want to sell or give away the Wavlink extender, resetting it will erase all data and ensure that your personal information is not shared with others.
There are two methods to Reset Wavlink Extender
There are usually two ways to Reset Wavlink extender
- Using the reset button: Most Wavlink extenders have a small button labeled “reset” or “WPS” on the back or bottom of the device. Pressing and holding this button for 10-15 seconds will reset the extender to its factory settings.
- Using the web interface: You can also reset the Wavlink extender through the web interface. To do this, connect to the extender’s wireless network and open a web browser. Navigate to the extender’s settings page, typically located under “Advanced” or “Maintenance,” and look for a “Reset” or “Factory Reset” option. To reset the device, follow the on-screen instructions.
How can I reset my Wavlink WiFi Repeater hard?
- Connect the booster.
- Put a solid pin in the reset button’s slot.
- Hold it for 8 to 10 seconds.
- then watch for your Wavlink repeater to restart.
- When it’s finished, you can see that all of the light is solidly flashing green.
- You can see some light automatically close in a few seconds.
- It has been successfully reset, so that’s good news.
How can I reset my Wavlink WiFi via the web interface?
- Open a web browser and type the IP address of the Wavlink router in the address bar. The default IP Address is usually 192.168.10.1
- Log in to the router’s web interface using the default username and password (usually admin and admin).
- Navigate to the “System” or “Maintenance” section of the web interface.
- Look for the option to “Reset” or “Reboot” the router.
- Click the “Reset” button and confirm the action. The router will reboot and all settings will be restored to the factory defaults.
- Once the router has rebooted, log back in to the web interface and reconfigure the settings as needed
If you are still having issues with Reset Wavlink Extender. Please contact our experts to guide you in the right direction and assist you with your Resetting.
Why does wifi.wavlink.com not work correctly?
There could be a few reasons why wifi.wavlink.com is not working correctly:
- Incorrect login credentials: If the login credentials provided are incorrect, the website will not function properly.
- Network connectivity issues: If there is a problem with the network connection, the website may not load or function properly.
- Website maintenance: The website may be undergoing maintenance or updates, causing it to be unavailable.
- Browser compatibility: The website may not be compatible with the browser being used.
- Outdated software: If the router’s firmware is outdated, it may not be able to connect to the website correctly.
