Mercedes battery replacement are simple to change for Dyers. You should check out all batteries prices list. All you require is a new battery along with a few basic tools and knowing where the original battery was to take it out of its socket prior to installing the new one.
Mercedes-Benz simplifies this by giving you directions regarding where to find it and how to take off your old one so that you can place a new one easily, mercedes battery replacement.
Signs A Mercedes Battery Needs Replacement:
The most typical sign that for when a Mercedes-Benz is in need of batteries is when they are having trouble starting the vehicle each day.
If it takes you a couple of minutes just to get the motor to run after you turn on your key it could mean there’s not enough power in the battery and requires replacing as soon as possible.
Tools Needed For Changing a Mercedes Battery:
10-mm socket wrench you’ll need this to separate the battery from both the Positive and Negative terminals.
13mm socket wrench it is used to remove the bracket which keeps the battery.
Extension of 8 inches it is possible that you will require one of these in order to release the battery from its terminals.
Cleaner for the battery post after you’ve removed the battery that was in it then you’ll have to wash the post of your battery.
How to Change A Mercedes Car Battery:
To prevent any accidents, make sure you place your car on a concrete surface and keep the brakes for emergency use extended. This will make certain that your car won’t slide when you change the batteries in your vehicle, and the components around it won’t be damaged, too.
Locate the Battery:
In the majority of Mercedes-Benz models the battery is situated in the left and inside your trunk. In less common versions it’s under the back seats, or in some models such as W203/R170, it’s close to the engine’s sink, close to the side of the driver.
Remove the Old Battery:
First, get rid of the battery. To begin, disconnect the positive charger from the socket and loosen the 10mm bolt holding it in place on the terminal strip or clamping surface using an adjustable wrench when needed (careful not to push anything). After that, gently twist off the clamps that are holding terminals down but don’t go over only a few turns.
Be sure to cover positively the terminals of your battery using electrical tape as it should not come into contact with any metallic parts of your Mercedes.
Remove the bracket that holds the battery in the correct position. The bracket is attached using a 13mm bolt. It usually requires an extension in order to take it off. Once the bracket is removed take the dead battery from the vehicle. Be aware of the weight of the battery that car batteries have, as they tend to be heavy. (On certain models, you may need to remove the cabin air filter in order to get access to your battery.)
Install the New Battery:
Installing a brand new battery is straightforward if the old one removed from the way. Take these actions to reverse the damage you’ve done earlier to bring your car back on the right track, mercedes battery replacement.
Remove the battery from the box to place on the tray for battery. After that, you can put the bracket for the battery back in the correct position. Connect both positive and negative battery terminals each.
Once you have placed the new battery into the vehicle, it’s the time to perform some synchronization steps to make sure that your Mercedes is fully functional.
We suggest using Banner batteries due to their outstanding performance, and also because they are widely used by the top German automobile manufacturers. Banner is a major supplier of automotive batteries including BMW, VW, Audi, Porsche, Mercedes, Rolls-Royce, Seat, Aston Martin, Suzuki, Volvo to name the few.