The Wavlink Aerial HD2 Outdoor Extender is a device that is designed to extend the range of a wireless network by amplifying and rebroadcasting the signal. It is specifically made for outdoor use, and it is able to provide a stable and strong signal in areas where the original signal is weak or non-existent. This extender can be used to extend the coverage of a wireless network to outdoor areas such as patios, decks, yards, and other outdoor spaces. It is compatible with both 2.4GHz and 5GHz wireless networks and can support multiple devices simultaneously.
If you get stuck or confused while configuring your Wavlink Aerial HD2 Outdoor Extender Setup , don’t worry; simply contact one of our knowledgeable specialists, and they will assist you.
Follow the given steps For Wavlink Aerial HD2 Outdoor Extender Setup
- Connect the Wavlink Aerial HD2 Outdoor Extender to a power source and turn it on.
- Connect the Outdoor Extender to your router using an Ethernet cable.
- Using a computer or mobile device, connect to the Wavlink network that is broadcasting from the Outdoor Extender. The default network name (SSID) and password can be found on the bottom of the device or in the manual.
- Once connected, open a web browser and enter the default IP address of the Outdoor Extender (192.168.10.1) into the address bar.
- Log in using the default username and password (admin/admin).
- Go to the Wireless Settings page and configure the wireless settings to match those of your router. This includes the SSID, password, and channel.
- On the same page, enable the WDS function and select the mode as Repeater.
- Click on Apply to save the settings and restart the Outdoor Extender.
- Your Wavlink Aerial HD2 Outdoor Extender is now set up and ready to use. Connect to the extended network and enjoy improved wireless coverage in outdoor areas.
Repeater mode for the Wavlink Aerial HD2 Extender Setup
- Connect the Wavlink Aerial HD2 Extender to a power source and wait for it to boot up.
- Connect a device (such as a laptop or smartphone) to the extender’s Wi-Fi network (the network name will be “Wavlink_XXXX” and the password will be on the bottom of the extender).
- Open a web browser and enter “192.168.10.1” into the address bar to access the extender’s web interface.
- Log in using the default username “admin” and the default password “admin”.
- Click on the “Wireless” tab and select “Repeater” from the drop-down menu.
- Scan for available wireless networks by clicking on the “Scan” button.
- Select the network you want to extend from the list of available networks.
- Enter the password for the selected network and click on the “Apply” button.
- The extender will now start repeating the selected network. You should now be able to connect devices to the extended network.
- If you have any issues with connectivity, you can try adjusting the channel settings on the extender to avoid interference.
- Once you are satisfied with the setup, you can save the configuration by clicking on the “Save” button.
- Now your Wavlink Aerial Outdoor Extender Setup is successfully done
If you get stuck or confused while configuring your Wavlink Aerial HD2 Outdoor Extender Setup , don’t worry; simply contact one of our knowledgeable specialists, and they will assist you.
How do I update the Wavlink AC600’s firmware?
- Use an Ethernet cable to link your device to the Wavlink AC600.
- Open a web browser and type the Wavlink AC600’s IP address into the address bar (the default is 192.168.10.1).
- Use the router’s default username and password (admin/admin) to access the web interface.
- Go to the web interface’s “Firmware Upgrade” or “System Update” section.
- To see if a newer version is available, click “Check for Updates” or “Check Firmware.”
- To start the update process if a newer version is available, click “Download” or “Upgrade.”
- To finish the update procedure, adhere to the instructions displayed on the screen.
- Restart the router after the update is finished to make sure the new firmware was properly installed.
What is the procedure for resetting my Wavlink Aerial HD2 AC600 wifi Extender?
To reset the Wavlink Aerial HD2 AC600 wifi extender, please follow these steps:
- Connect a power source to your Wavlink AC600.
- Find the factory reset button under a small hole.
- It could be found on the side panel of the repeater.
- Using a paperclip, press the reset button for 8 to 10 seconds.
- After a few moments, it will automatically restart.
- With your extender, you can now begin the new installation procedure.
Please note that resetting the extender will erase any previous configurations, so you will need to set it up again once it has reset.Once the extender has rebooted, it will return to its factory default settings.
If you get stuck or confused while configuring your Wavlink Aerial HD2 Extender Setup , don’t worry; simply contact one of our knowledgeable specialists, and they will assist you.
